The fabulous Extra-330s 90 ARF is pre decorated with an eye catching color scheme. All built-up construction with quality balsa wood which results in a light but strong model. Nicely painted fiberglass cowl and spats. Including with the kit, there are a complete hardware pack and full color decals. You will enjoy flying this model with great delights. Wingspan 65 inch Length 56 inch Weight 3.8~3.9 kg Wing Loading 76~78 dm/2 Airfoil Naca 0014 Wing Area 50 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 90 purchase separately 4 Strok Engine 91~120 purchase separately

This is a wholesale case. Coming in at blazingly fast speeds is the Ed Hardy Special Edition Viper 28 Inch RTR Electric RC Racing Boat brought to you by Christian Audigier! Professionally designed and manufactured with PC twin-propellers which not only provides huge thrust to speeds of 15-20mph, but its durable as well. Click on the image to watch a video of the new Ed Hardy Viper Racing Boat In Action!

The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks!Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dmFlying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mmEngine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servosDecals included but not pre-applied.

The CMPro Katana 50 ARF is of balsa wood construction to ensure maximum performance. Very agile and impressively colored it causes heads to turn. The plane performs smooth and accurate flying that beyond your expectations. Wingspan 1350mm Length 1270mm Weight 2.75~2.85 kg Wing Loading 91~95 dm/2 Airfoil Naca 0014 Wing Area 30 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 46~50 purchase separately 4 Strok Engine 52~63 purchase separately Construction is built-up balsa except for the fiberglass cowl and spats. Full color decal sheet is included. The bottom color design is too eye-catching that you will never lose this plane from you sight. A plastic cockpit and clear PVC canopy are included.

with Velineon brushless power and 4WD!

Specification Disp(cc): 19.96 Bore(mm): 30.4 Stroke(mm): 27.5 Propeller(recommended):13x6 Practical range(r.p.m): 2000--11500 Weight(g): 1000

This is a wholesale case of 24 Mini Buggy 1:52 Scale Electric RTR RC Cars. Its time for some off road action with the Mini Buggy Electric RC Car. This amazing RC comes in at 5 inches long making it small enough to fit on the palm of your hand. Comes in 4 different colors and 4 frequencies so you can race 4 at the same time!

The new generation of 1/8 Monster trucks are here with much newly added features and functions. The MadBeasts are the pioneering brand of the Nitrorcx Exceed RC 1/8 tectonics. If you thought the 1/8 tectonics were impressive prepare to be astonished by the innovative Mad Beasts. Everything from the ground-up has been reinvented and modified to enhance the delight of having fun with the RC once again. This massive monster truck comes with Level .28 engine for speed of swiftness, polished aluminum chassis to provide clean look as well as sturdiness, adjustable shocks to have perfect landing, a bigger fuel tank that can hold 270cc. The impressiveness of the MadBeast can be seen right out of the box when examine at first glance from the well-built interior to the magnificent exterior designs. From the front bumper to the back bumper all pieces have been build to last. Included in the MadBeasts are aluminum muffler for superior protection and better looks, and heavy duty metal gear steering servo so you don't have to worry about it breaking. Even the rims are now hardened chrome rims and colossal tires to triumph over the world. Use the MadBeast to climb off road terrain, stony hills, rocky backyards, or wherever the road may take you. For the MadBeasts will lead the way to new standards for the RC world and conquer all. Full Assembled Chassis with Painted body, and complete with Radio system!! Full ball bearings, all metal transmission gears, metal geared steering servos, this one has it all!! Pistol Remote Control Radio& Engine 28 Level WheelBase:15" Weight:5.2kg Polished 6061 Aluminum Chassis PlatesMassive pre-glued 6.75" Tires Mounted on Hardened Chrome Rims With 17mm Hex Hub 2-Speed Transmission Heavy Duty Metal Gear Steering Servo 270cc Flip-top Fuel Tank Adjustable Threaded Aluminum ShocksAluminum Muffler Hardeded and Coated Steel Gears Multi-piece rollbar Steel High-Temp Brake Disc Heavy Duty Slipper Clutch 3-Shoe Racing ClutchFull Sealed Ball Bearing Set All Assembled with Radio and Ready to Run Over the Competition!

This is the brand new 4 CH AirWolf Twin-Rotor-Coaxial helicopter. This helicopter is one of the newest dual-rotor in the market. The Twin-Rotor-Coaxial-Twin-Rotor design the helicopter has extreme stability in taking off and easily control by any beginner pilots.The AirWolf is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course .The AirWolf has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the AirWolf turning in the direction opposite to the rotation of the faster moving rotor. Since the AirWolf is fixed pitch, collective control is governed exclusively by throttle.On the AirWolf, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the AirWolf stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying the AirWolf out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the AirWolf tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. The Li- poly battery will help to achieve better performance and longer flight time. Improved version! This is the 2009 version with a lot of adjustment and improvements 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts for easy set up Scale appearance Factory Pre- assemble

This is the brand new 4 CH EC-120 Twin-Rotor-Coaxial helicopter. This helicopter is one of the newest dual-rotor in the market. The Twin-Rotor-Coaxial-Twin-Rotor design the helicopter has extreme stability in taking off and easily control by any beginner pilots.The CH EC-120 is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course .The CH EC-120 has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the CH EC-120 turning in the direction opposite to the rotation of the faster moving rotor. Since the CH EC-120 is fixed pitch, collective control is governed exclusively by throttle.On the CH EC-120, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the CH EC-120 stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying theCH EC-120 out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the CH EC-120 tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. The Li- poly battery will help to achieve better performance and longer flight time. Improved version! This is the 2009 version with a lot of adjustment and improvements 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts for easy set up Scale appearance Factory

This is the brand new 4 CH EC-120 Twin-Rotor-Coaxial helicopter. This helicopter is one of the newest dual-rotor in the market. The Twin-Rotor-Coaxial-Twin-Rotor design the helicopter has extreme stability in taking off and easily control by any beginner pilots.The CH EC-120 is a beginner-friendly rc helicopter enjoyed by inexperienced/experienced flyers. Its unique design makes it easy to configure, control, and more fun to fly. It is designed to train pilots and entertain them by delivering a stable flying platform capable of controlled indoor and outdoor flight course .The CH EC-120 has two sets of main rotors and a freewheeling tail rotor that does not affect flight. The counter-rotating main rotors eliminate the need for tail rotor compensation because they move in opposite directions, canceling each other?s rotational torque . In addition, the blade sets give it an added bit of gyroscopic stability, which allows mere mortals to hover it with prowess. The lower rotor provides cyclic control for the heli. To yaw the helicopter (left and right), one of the main rotors either slows down or speeds up to create an imbalance in torque. This results in the CH EC-120 turning in the direction opposite to the rotation of the faster moving rotor. Since the CH EC-120 is fixed pitch, collective control is governed exclusively by throttle.On the CH EC-120, the roll cyclic is a bit more responsive than its pitch cyclic (fore/aft control). This is because the very small range of cyclic control can more easily roll the heli than it can pitch it along the length of the body. This attribute actually helps make the CH EC-120 stable. For a heli of this size, the responsiveness on both axes is appropriate. For beginners, flying theCH EC-120 out of ground effect (first few inches off the ground) is not difficult either. Unlike other micros, the CH EC-120 tends to rise evenly rather than skate across the floor laterally. If you punch the throttle, it has no hesitation in climb either. The Li- poly battery will help to achieve better performance and longer flight time. Improved version! This is the 2009 version with a lot of adjustment and improvements 4 Channel remote control set includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts for easy set up Scale appearance Factory

The CMPro Ventus is well-designed to make building and flying a lot of fun, it features: High precision fiberglass fuselage with fine painting that perfectly reflects the nice appearance of Ventus. Nicely covered wing panel built by quality balsawood, a decal set is included which you can personalize the design. Wing tips in order to reduce the tendency to stall and enhance scale feelings. Removable tailplane for easy transportation. Clear navy blue canopy with cockpit. An air-brake that efficiently raises control of the plane and makes landing an easy thing to do! The design is also aimed to make assembly as simple as possible. A steering set is included to help setting up the air-brake and make it easy to use. A retract system that makes the Ventus suitable for different flying locations. The retract is easy to use and is linked with the hatch door for scale features. A 8mm-hole is pre-drilled at the nose for towing on runways. The construction inside fuselage is already prepared for tractors and thus no further conversion is needed. SCALE GLIDER Wingspan:2600mm Professional Reviews by RCJetYou bet. Quality is beyond, way beyond, expectations. This is a $600 European glass slipper sailplane selling for only $139.I have her mostly done. I used digital minis all around, but then when I got to the last few, I realized it was dumb to throw an expensive digital servo at the rudder, spoiler, retract, and tow release controls, so I stopped final assembly until I can get some cheaper servos ordered.The retract mechanism and gear doors are spectacular.Glasswork and paint are spectacular, with factory applied and clearcoated decals.Excellent instructions, and a ton of neat hardware and thoughtful touches.CMP has outdone themselves on this one, this is kind of like "the Chinese have really ARRIVED", you know? Wingspan 2600mm Length 1190mm Weight 1.2~1.3 kg Wing Loading 41~45 dm/2 Airfoil HX83-nase 3 Modify Wing Area 29 dm/2 Radio Control 3~6 Ch 4~7 Servos purchase separately What the Pro says! You bet. Quality is beyond, way beyond, expectations. This is a $600 European glass slipper sailplane selling for only $139. I have her mostly done. I used digital minis all around, but then when I got to the last few, I realized it was dumb to throw an expensive digital servo at the rudder, spoiler, retract, and tow release controls, so I stopped final assembly until I can get som